Moxa Technologies VPort 251 Instalační příručka

Procházejte online nebo si stáhněte Instalační příručka pro Digitální videorekordéry (DVR) Moxa Technologies VPort 251. Moxa Technologies VPort 251 Installation guide Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 16
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 0
Moxa Video Encoder
VPort 251 Series
Quick Installation Guide
Second Edition, June 2008
© 2008 Moxa Inc., all rights reserved.
Reproduction without permission is prohibited.
P/N:1802002510010
Zobrazit stránku 0
1 2 3 4 5 6 ... 15 16

Shrnutí obsahu

Strany 1 - Quick Installation Guide

Moxa Video Encoder VPort 251 Series Quick Installation Guide Second Edition, June 2008 © 2008 Moxa Inc., all rights reser

Strany 2 - Features

DIN-Rail Mounting (Optional) The VPort 251 can be mounted on a 35-mm DIN-rail using the DK-35A accessory (ordered separately). Wall Mounting Th

Strany 3

You should also pay attention to the following: y Use separate paths to route wiring for power and devices. If power wiring and device wiring paths

Strany 4 - VPort 251 Panel Layout

STEP 1: Insert the negative (ground)/positive DI wires into the ┴/I1 terminals. STEP 2: To keep the DI wires from pulling loose, use a small flathea

Strany 5

RJ45 (10-pin) to DB25 (F) Cable Wiring RJ45 Plug Pin 1DCDDSRRTSGNDTxDRxDCTSDTRDCDDTRCTSGNDRxDTxDRTSDSR1234/75689864723520 10/100BaseT(X) Ethernet Por

Strany 6

PTZ Port A PTZ port is located on the VPort 251’s bottom panel. The port is used to connect to a PTZ motorized camera or device, so that the camera o

Strany 7

- 15 -Specifications Video Video Compression MPEG4, MJPEG Video Input 1, BNC connector NTSC/PAL Auto-sensing or manual Video Resolution and FPS

Strany 8

- 16 -EMS EN61000-4-2 (ESD), Level 2 EN61000-4-3 (RS), Level 3 EN61000-4-4 (EFT), Level 3 EN61000-4-5 (Surge), Level 3 EN61000-4-6 (CS), Le

Strany 9 - VPort 251

- 2 -Overview The VPort 251 is a high performance, 1-channel video encoder in a compact form factor that is suitable for installation in a variety o

Strany 10 - 1-Channel Video Encoder

- 3 -y 1 auto-sensing 10/100BaseT(X) Ethernet port y RS-232/RS-422/RS-485 COM port for controlling PTZ (pan/tilt/zoom) motorized cameras y &qu

Strany 11 - Wiring the Digital Inputs

VPort 251 Panel Layout 2511-Channel Video EncoderTCP,UDP,HTTP,DHCP,SMTP,FT P,N TP, DN S, RT SP, IG MP,QoS,DDNS,SNMPPTZRS-232 or RS-422/485POWER1x pow

Strany 12 - Communication Connections

- 5 -Initial Installation and Configuration Before installing the VPort 251, verify that all items in the package checklist are present. In addition

Strany 13

NOTE Drivers are required to support specific PTZ control protocols. The VPort 251 supports the following protocols: y Pelco D y Pelco P y DynaC

Strany 14 - LED Indicators

3. When the search is complete, every EDS switch and VPort found on the network will be listed onscreen. NOTE Broadcast Search can only search fo

Strany 15 - Specifications

NOTE For Windows XP SP2 or above, the ActiveX Control component may be automatically blocked for security reasons. In this case, the warning message

Strany 16

For details on each item, please refer to the User’s Manual. NOTE Administrators should go to System Configuration Æ System Æ Account in the VPort’

Komentáře k této Příručce

Žádné komentáře