Moxa Technologies 6110 Manuál stáhnout pdf (Strana 26)

TC-6110 Hardware Hardware Installation

2-16

Step 6: In addition, you will need to release all hardware interfaces from the front plate of the main interface

module. These are two panel screws, four screws holding the D-Sub connectors in place, and the four rings that

fasten the four M12 connectors in place (audio, USB, and two LAN ports). These are all shown below.

Step 7: Finally, a single screw on either side of the heat sink also needs to be removed.

Step 8: Once all screws have been unfastened, gently push the cover to the left to reveal the battery’s location.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 44 45

Žádné komentáře

Moxa Technologies 6110 Manuál Strana 26