
6-8
Remote Monitoring Solutions
www.moxa.com
6
Video Networking Solutions >
VPort 354 Series
Video
Video Compression: MJPEG or MPEG4 (ISO/IEC 14496-2)
Video Stream: Dual streams (one for MJPEG, the other for MPEG4)
at the same video resolution (note that MJPEG only has one quality
setting)
Video Inputs: 4, BNC connector (1.0 Vpp, 75 ohms)
NTSC/PAL: Auto-sensing or manual
Video Resolution and FPS (frames per second):
Video Viewing:
• Adjustable image size and quality
• Timestamp and text overlay
Video Output: Via Ethernet port
Audio
Audio Inputs: 1 Line-in or MIC-in with RCA connector
Audio Outputs: 1 Line-out with RCA connector
Network
Protocols: TCP, UDP, HTTP, SMTP, FTP, Telnet, NTP, DNS, DHCP,
UPnP, RTP, RTSP, ICMP, IGMPv3, QoS, SNMPv1/v2c/v3, DDNS
Ethernet: 2 10/100BaseT(X) auto negotiating RJ45 ports, or 2
100BaseFX fi ber ports (single/multi-mode, SC connector)
Optical Fiber:
Serial Port
PTZ Ports: 1, RS-232/422/485 port (terminal block connector), max.
speed of 115.2 Kbps, with 15 KV ESD protection
COM Ports: 1, RS-232/422/485 (DB9 female connector), max. speed
of 115.2 Kbps, with 15 KV ESD protection
Console Port: 1 RS-232 RJ45 port
Specifi cations
NTSC PAL
Size Max. FPS Size Max. FPS
QCIF
176 x 120 30 176 x 144 25
CIF
352 x 240 30 352 x 288 25
2CIF
704 x 240 30 704 x 288 25
4CIF
704 x 480 30 704 x 576 25
100BaseFX
Multi-mode Single-mode
Wavelength 1300 nm 1310 nm
Max. TX -10 dBm 0 dBm
Min. TX -20 dBm -5 dBm
RX Sensitivity -32 dBm -34 dBm
Link Budget 12 dB 29 dB
Typical Distance
5 km
a
4 km
b
40 km
c
Saturation -6 dBm -3 dBm
a. 50/125 µm, 800 MHz*km fi ber optic cable
b. 62.5/125 µm, 500 MHz*km fi ber optic cable
c. 9/125 µm single-mode fi ber optic cable
The VPort 354 uses Moxa’s Real COM technology to implement
transparent communication for RS-232/422/485 PTZ control. The
benefit of the Transparent PTZ Control function is that it eliminates the
need to build the PTZ control driver into the VPort product, allowing
the use of a legacy PTZ control panel or keyboard to control a PTZ
camera directly.
PTZ camera
VPort 354
video encoder
VPort D351
video decoder
PC
Joystick and
control panel
Joystick and
control panel
Transparent PTZ Control for Easy Control of PTZ Cameras
Ethernet
Serial
CCTV
GPIO
Digital Inputs: 4, max. 8 mA
• High: +13 to +30V
• Low: -30 to +3V
Relay Outputs: 2, max. 24 VDC @ 1 A
LED Indicators
STAT: Indicates if the system booted properly or not
PWR1: Power 1
PWR2: Power 2
FAULT: Can be confi gured to correspond to system alarm, power
failure, video loss, or disconnected network
V1, V2, V3, V4: Video input signal activity
Local Storage
SD Socket: Standard SD socket, V2.0, with SD LED indicator
Power Requirements
Input Voltage: 2 12/24 VDC or 24 VAC inputs for redundancy
Power Consumption: Approx. 12 W
Physical Characteristics
Housing: Metal, IP30 protection
Dimensions: 80.2 x 135 x 105 mm (3.16 x 5.31 x 4.13 in)
Weight: 1200 g
Installation: DIN-Rail mounting, wall mounting (with optional kit)
Alarms
Pre/Post Alarm: 9 MB memory for video recordings
Video Motion Detection: Includes sensitivity tuning
Video Loss: Video loss alarm
Scheduling: Daily repeat timing schedule
Imaging: JPEG snapshots for pre/trigger/post alarm images
Email/FTP Messaging: Automatic transfer of stored images via email
or FTP with event-triggered actions
Custom Alarms: HTTP event servers for setting customized alarm
actions
PAN/TILT/ZOOM
PTZ Camera Control: Via RS-232/422/485 PTZ port or COM port
PTZ Control Functions: PAN, TILT, ZOOM, FOCUS, moving speed,
preset position (max. 25 positions), and 10 custom commands
PTZ Function Updates: Driver upload supported
Supported Devices and Protocols: Pelco D, Pelco P, Dynacolor
DynaDome, Custom Camera
Transparent PTZ Control: Control PTZ cameras with legacy PTZ
control panel or keyboard connected to a PC or VPort decoder
Security
Password: User level password protection
Filtering: By IP address
Environmental Limits
Operating Temperature:
Standard Models: 0 to 60°C (32 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Komentáře k této Příručce