Moxa Technologies VPort 251 Uživatelský manuál stáhnout pdf (Strana 20)

VPort CGI Commands VPort CGI Commands

1-17

B6 3600 Kbps 3528 Kbps 3204 Kbps 864 Kbps 216 Kbps

B7 4200 Kbps 4116 Kbps 3738 Kbps 1008 Kbps 252 Kbps

Image

This section applies to 1-channel video encoders or IP cameras.

Item Action Value Description

mode S Save Save the adjusted image setting to the server

brightness G/S -5 to 5 Video brightness adjustment

contrast G/S -5 to 5 Video contrast adjustment

hue G/S -5 to 5 Video hue adjustment

saturation G/S -5 to 5 Video saturation adjustment

image##

This section applies to 4-channel video encoders; “##” indicates the channel number of the video encoder

(01/02/03/04). For example: image04_hue, HUE value of Channel 4.

Item Action Value Description

Mode S Save Saves the adjusted image setting to the server

Brightness G/S -5 to 5 Video brightness adjustment

Contrast G/S -5 to 5 Video contrast adjustment

Hue G/S -5 to 5 Video hue adjustment

Saturation G/S -5 to 5 Video saturation adjustment

audio

Item Action Value Description

source G/S 1: Line in

2: Microphone

Audio input type

NOTE

The

VPort 364-M12 has 2 audio input sources: source01 and source02

VPort 351 and VPort 251 serial and PTZ control

configuration

serial

This section covers PTZ port settings of the VPort 251 and VPort 351 video encoders. Selecting the PTZ driver

requires choosing the related PTZ camera. When the PTZ camera receives PTZ control CGI commands (refer to

page??), “move up” for example, it will translate into a PTZ serial command pattern that is sent to the PTZ

camera through the serial interface. If the VPort is configured for driverless Transparent PTZ Control, the VPort

will convert the serial data to Ethernet packets, but will not translate any commands.

CGI command example for setting the PTZ UART interface mode to RS485:

http://<ip>/moxa-cgi/setparam.cgi?serial_uartmode=1

Item Action Value Description

camid G/S 0 to 255 PTZ camera ID (or address)

uartmode G/S 0: RS232

1: RS485

2: RS422

UART interface mode

baudrate G/S 110, 300, 600, 1200, 2400, 3600, 4800,

7200, 9600, 19200, 38400, 57600

Baud Rate (bps)

databit G/S 5 to 8 Data bit

dtopbit G/S 1, 1.5, 2 Stop bit

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 29 30

Komentáře k této Příručce

Žádné komentáře

Moxa Technologies VPort 251 Uživatelský manuál Strana 20

Komentáře k této Příručce

Související produkty a manuály pro Digitální videorekordéry (DVR) Moxa Technologies VPort 251