Moxa Technologies VPort 251 Uživatelský manuál stáhnout pdf (Strana 22)

VPort CGI Commands VPort CGI Commands

1-19

Interface for defining custom commands to specify PTZ command strings.

camctrl

Item Action Value Description

presetname01 to

presetname20

G Max 60 char Name of preset position of camera

control

VPort 451/461/254/ 354/364/364A/VPM7304

serial and PTZ control configuration

ptzport

This section covers PTZ port settings for video encoders; 2 different modes are used: Specific PTZ driver mode

and Transparent Mode. A suitable PTZ driver must be used for PTZ driver mode, in which case the VPort

receives PTZ control CGI commands (refer to page ??) such as “move up.” It will be translated into a PTZ serial

command pattern that is sent to the PTZ camera through the serial interface.

CGI command example for setting the PTZ UART interface mode to RS485:

http://<ip>/moxa-cgi/setparam.cgi?ptzport_uartmode=1

Item Action Value Description

baudrate G/S 110, 300, 600, 1200, 2400, 3600,

4800, 7200, 9600, 19200, 38400,

57600, 115200

Baud rate (bps)

databit G/S 5 to 8 Data bit

paritybit G/S 0: None

1: Odd

2: Even

Parity bit

stopbit G/S 1, 1.5, 2 Stop bit

uartmode G/S 0: RS232

1: RS485

2: RS422

UART interface mode

ptzdriver G/S 1: Transparent PTZ

2: Custom Camera

3: Pelco D

4: Pelco P

5: DynaColor

6: Cohu

PTZ camera selection

controlmode G/S 0: Transparent PTZ Control

1: Specific PTZ Driver

PTZ control mode.

speedlinkname01

G/S Max. 8 char (BasicString) User defined command name.

These commands can be used for

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 28 29 30

Komentáře k této Příručce

Žádné komentáře

Moxa Technologies VPort 251 Uživatelský manuál Strana 22

Komentáře k této Příručce

Související produkty a manuály pro Digitální videorekordéry (DVR) Moxa Technologies VPort 251