Moxa-technologies IA5150 Uživatelský manuál stáhnout pdf (Strana 48)

NPort IA5150/5250 Series User’s Manual Web Console Configuration

5-23

UDP Mode

Packing length

Setting Factory Default Necessity

0 to 1024 0 Optional

Default = 0, The Delimiter Process will be followed, regardless of the length of the data packet. If

the data length (in bytes) matches the configured value, the data will be forced out. The data length

can be configured for 0 to 1024 bytes. Set to 0 if you do not need to limit the length.

Delimiter 1

Setting Factory Default Necessity

00 to FF None Optional

Delimiter 2

Setting Factory Default Necessity

00 to FF None Optional

Once the NPort IA5150/5250 receives both delimiters through its serial port, it immediately packs

all data currently in its buffer and sends it out the NPort IA5150/5250’s Ethernet port.

ATTENTION

Delimiter 2 is optional. If left blank, then Delimiter 1 alone trips clearing of the buffer. If the size

of the serial data received is greater than 1 KB, the NPort IA5150/5250 will automatically pack

the data and send it to the Ethernet. However, to use the delimiter function, you must at least

enable Delimiter 1. If Delimiter 1 is left blank and Delimiter 2 is enabled, the delimiter function

will not work properly.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 107 108

Žádné komentáře

Moxa-technologies IA5150 Uživatelský manuál Strana 48